LN-9553IQ-REG2-72-689, LCN
9550 Senior Swing Series Electromechanical Auto Operator
The 9550 Senior Swing by LCN is a low energy, electromechanical automatic operator. The 9500 Senior Swing Series is designed for surface mount applications. The 9550 is a double door operator with two motor gearboxes and one controller. It can be configured for push, pull, or double egress applications. The power boost provides additional closing force in severe wind. Push ‘N Go non-switch activation takes over when a pedestrian manually opens the door to 5°, then holds the door fully open for 1-30 seconds, depending on the time delay. A mounting plate is suggested for hollow metal frame applications. Order as a separate item.
FEATURES
- Cover: Metal Cover (MC) Standard
- Fluid: All Weather Fluid
- Mounting: Mounting: Simultaneous Pair, Surface Mount, Pull Side, Push Side, Double Egress
- Fasteners: Machine Screws (MS)
- Voltage: 115 Volts Standard, optional 120 Volts available.
- Maximum Opening: Templating allows 90° power opening and 90° manual opening
- Maximum Opening Force: 15 lbs
- Opening Time: Variable by adjustments to the electronic control box
- Maximum Hold-Open Time: Adjustable 2 - 32 seconds in automatic or manual mode
- Driving Mechanism: Motorized Gearbox
- Power Boost: Provides additional latch forcing for electromechanical unit with microprocessor control
- Push N' Go: Permits non-switch activation
- Digital Keypad: Allows for easy setup
DIMENSIONS
- Push Side Combined Door Width: 52"-98"
- Pull Side/Double Egress Combined Door Width: 60" - 98"
- Top Rail: Minimum 2 3/4" (70 mm)
- Head Frame: Minimum 1 3/4" (44 mm); face frame 6 3/4" (171 mm) total operator clearance
CUT SHEETS
LCN Automatic Operators Catalog
TEMPLATES
LCN Closers and Auto Operators Templates and Instructions Index
CERTIFICATIONS
- Meets ADA requirements (power mode)
- UL and cUL listed
- Tested and certified under ANSI/BHMA A156.19 Grade 1
- Meets BAA - Buy American Act
| No DPS | Standard |
| Door Position Switch (DPS) | Door Position Switch concealed in the arm and spindle plate |
| Regular Arms (REGARM) | Standard 15" Linkage Assemblies Push Side Mounting Maximum Reveal: 10" (254 mm) |
| Long Arms (LONG) | Includes (2) 32" 9550IQ-79LR Linkage Assemblies for deep reveals Push Side Mounting Maximum Reveal: 20" (508 mm) |
| Standard Arm Assemblies with Track Rollers (STDTRKARM2) | Includes (2) 3077 Regular Arm Assemblies, 3038 Track, and 3034 Track Rollers Pull Side Mounting Maximum Reveal: 4" (102 mm) |
| Double Egress Arms (REGSTDDE) | Includes Regular Arm Assembly for Push Side door and Standard Arm Assembly for Pull Side door Double Egress Mounting Maximum Reveal: 4" (102 mm) |
| 628 | Clear Anodized Aluminum |
| 710 | Dark Bronze Anodized |